Share Print
Vention VGA(3+9) Male to Male Cable 20M Black
Share
-33%New

Vention VGA(3+6) Male to Male Cable with ferrite cores 1.5M Black

in VGA Cables/ Adapters

KSh1,000 Save:KSh500(33%) Ex VAT

Available in stock

Key Features & Benefits

  • 3+6 Conductor Configuration: The 3+6 wiring layout uses three individually shielded coaxial conductors for the red, green, and blue video channels, plus six additional wires for horizontal sync, vertical sync, and DDC communication. This full wiring complement ensures accurate colour reproduction, stable sync, and proper monitor detection by the source device.
  • Ferrite Cores at Both Ends: Ferrite cores clamp onto the cable at each connector end and act as passive filters, suppressing high-frequency electromagnetic interference (EMI) from nearby power cables, USB devices, and other electronics. The result is a cleaner, more stable image — particularly noticeable at higher resolutions and on larger displays where interference artefacts are more visible.
  • Full HD Resolution Support: Supports resolutions up to 1920×1080 at 60Hz, delivering sharp, stable output on any compatible VGA monitor or projector. Lower resolutions including 1280×1024, 1366×768, and 1024×768 are also fully supported.
  • 1.5M Cable Length: The 1.5-metre length suits standard desk setups — from a desktop tower or laptop VGA output to a monitor or projector — with enough slack for comfortable cable routing without excess coiling on the desk.
  • Gold-Plated Connectors: Gold-plated 15-pin D-Sub connectors on both ends resist oxidation and corrosion, maintaining reliable electrical contact and signal integrity over the lifetime of the cable and through repeated connections.
Category:
Description

Vention VGA (3+6) Male to Male Cable with Ferrite Cores – 1.5M Black

The Vention VGA (3+6) Male to Male Cable is a 1.5-metre VGA cable designed to carry an analog video signal between a VGA output on a computer and a VGA input on a monitor, projector, or display. The 3+6 construction — three coaxial conductors for the RGB video signals plus six additional wires for sync and control signals — is the standard wiring configuration for a full-featured VGA cable capable of carrying high-quality video at resolutions up to 1080p. The ferrite cores at both ends suppress electromagnetic interference, reducing signal noise that can cause image softness, colour fringing, or flickering at higher resolutions. At 1.5 metres, it suits the majority of desk setups comfortably, and the male-to-male connectors make it a direct connection between source and display with no adapters required.

 

Technical Specifications

Connector Types

  • Both Ends: VGA (Male, 15-pin D-Sub)
  • Configuration: Male to Male — direct connection between VGA output and VGA input

Cable & Build

  • Length: 1.5M
  • Color: Black
  • Conductor Configuration: 3+6 (3 coaxial RGB channels + 6 signal/control wires)
  • Shielding: Individual coaxial shielding on RGB channels
  • Ferrite Cores: Yes — one at each end for EMI suppression
  • Connector Finish: Gold-plated 15-pin D-Sub on both ends
  • Cable Construction: Strain relief at both connectors

Video Performance

  • Maximum Resolution: 1920×1080 (Full HD) at 60Hz
  • Refresh Rate: Up to 60Hz
  • Signal Type: Analog (VGA)
  • HDR: Not supported — VGA is an analog standard

Audio

  • Audio Transmission: Not supported — VGA carries no audio signal

Compatibility

  • Source Devices: Any desktop, laptop, or device with a VGA output
  • Display Devices: Any monitor, projector, or screen with a VGA input
  • OS Support: Windows, macOS, Linux — no drivers required
  • Note: Both source and display must have VGA ports; this cable does not perform any signal conversion

Similar Products