Vention VGA (3+6) Male to Male Cable with Ferrite Cores – 20M Black
The Vention VGA (3+6) Male to Male Cable is a 20-metre VGA cable designed for long-distance analog video signal runs between a VGA source and a VGA monitor, projector, or display. At 20 metres, this cable operates at the practical upper boundary of passive VGA signal transmission — the point where cable construction quality, shielding integrity, and ferrite EMI suppression shift from desirable features to essential ones. The 3+6 conductor configuration provides the full complement of RGB, sync, and DDC wiring required for complete VGA functionality, and the ferrite cores at both ends suppress the electromagnetic interference that a cable of this length will inevitably encounter across its run. It suits large-room AV installations, auditoriums, exhibition halls, and any permanent infrastructure where the source device and display are separated by a distance that shorter cables cannot bridge without extensions or signal repeaters.
Technical Specifications
Connector Types
- Both Ends: VGA (Male, 15-pin D-Sub)
- Configuration: Male to Male — direct connection between VGA output and VGA input
Cable & Build
- Length: 20M
- Color: Black
- Conductor Configuration: 3+6 (3 coaxial RGB channels + 6 signal/control wires)
- Shielding: Individual coaxial shielding on RGB channels
- Ferrite Cores: Yes — one at each end for EMI suppression
- Connector Finish: Gold-plated 15-pin D-Sub on both ends
- Cable Construction: Strain relief at both connectors
Video Performance
- Maximum Resolution: 1920×1080 (Full HD) at 60Hz
- Refresh Rate: Up to 60Hz
- Signal Type: Analog (VGA)
- Recommended Use: Signal amplifier advised for critical image quality applications at this length
- HDR: Not supported — VGA is an analog standard
Audio
- Audio Transmission: Not supported — VGA carries no audio signal
Compatibility
- Source Devices: Any desktop, laptop, or device with a VGA output
- Display Devices: Any monitor, projector, or screen with a VGA input
- OS Support: Windows, macOS, Linux — no drivers required
- Note: Both source and display must have VGA ports; this cable performs no signal conversion






