-
Sale
Dual Functionality Design
- Integrated USB hub and Gigabit Ethernet adapter in single compact device
- Three USB 3.0 Type-A ports plus one RJ45 Gigabit Ethernet port
- Independent subsystems operating simultaneously without resource conflicts
- Eliminates need for separate USB hub and network adapter
- Consolidates connectivity requirements into 110mm × 45mm aluminum housing
USB 3.0 Hub Performance
- USB 3.0 (USB 3.1 Gen 1) technology delivering up to 5 Gbps theoretical bandwidth
- Real-world transfer speeds approaching 500 MB/s per port when used individually
- Shared 5 Gbps bandwidth distributed dynamically across active USB connections
- Three USB Type-A female ports with 12mm spacing between adjacent ports
- Simultaneous data transfers supported across multiple ports
USB Port Power Delivery
- Up to 900mA power output per port adhering to USB 3.0 specifications
- Total USB power delivery up to 2.7 watts across three ports
- Supports bus-powered peripherals including external drives, flash drives, keyboards, mice, and webcams
- Individual port power management for efficient current allocation
- Over-current protection on each USB port preventing damage from power surges
Gigabit Ethernet Specifications
- RJ45 port implementing 1000BASE-T Gigabit Ethernet connectivity
- Theoretical maximum throughput of 1000 Mbps (125 MB/s)
- Real-world performance typically achieving 900-940 Mbps due to protocol overhead
- Auto-negotiation supporting 10/100/1000 Mbps network speeds
- Full-duplex communication enabling simultaneous transmission and reception at maximum speeds
Realtek RTL8153 Chipset
- Proven Realtek RTL8153 Gigabit Ethernet controller for reliable network performance
- IEEE 802.3, 802.3u, and 802.3ab standards compliance
- Integrated PHY (Physical Layer) circuitry eliminating external transceiver requirements
- Hardware-level checksum offloading reducing CPU utilization during network transfers
- Advanced power management reducing energy consumption during idle periods
Network Protocol Support
- IPv4 and IPv6 protocol stack compatibility
- VLAN tagging support (IEEE 802.1Q) for network segmentation
- Energy Efficient Ethernet (IEEE 802.3az) reducing power consumption
- Jumbo frame support up to 9KB for improved network transfer efficiency
- Auto MDI/MDIX crossover detection and auto-correction eliminating crossover cable requirements
Wake-on-LAN Functionality
- Wake-on-LAN (WoL) support for remote system activation
- Enables remote desktop access to powered-down machines (OS and BIOS dependent)
- Network-triggered boot functionality for enterprise management scenarios
- Reduces standby power consumption while maintaining remote accessibility
Backward Compatibility
- Full compatibility with USB 2.0 devices (480 Mbps)
- Supports legacy USB 1.1 peripherals (12 Mbps)
- Automatic speed negotiation per USB port based on connected device capabilities
- Mixed device operation allowing USB 3.0 and USB 2.0 devices simultaneously
- Ethernet adapter auto-negotiates to 100 Mbps or 10 Mbps for legacy network equipment
Physical Construction
- Aluminum alloy housing measuring approximately 110mm × 45mm × 17mm
- Lightweight construction at approximately 70 grams for enhanced portability
- Space gray aluminum finish matching modern laptop aesthetics
- Passive heatsink design utilizing aluminum's thermal conductivity
- Fanless operation ensuring completely silent performance (0 dB)
Cable and Connector Design
- Integrated 15cm USB Type-C cable with strain relief reinforcement
- Reversible USB-C connector eliminating insertion direction concerns
- Captive cable design preventing separation and loss of connection cable
- Sufficient cable length for desktop placement flexibility without excess slack
- Strain relief at USB-C connector junction preventing wire damage from repeated bending
LED Status Indicators
- Blue LED indicator on top surface for USB hub power and activity status
- Integrated Ethernet link/activity LEDs within RJ45 port housing
- Green LED indicates Gigabit (1000 Mbps) connection speed
- Amber LED indicates Fast Ethernet (100 Mbps) connection speed
- Flickering LEDs indicate active network data transmission and reception
Thermal Management
- Aluminum chassis functions as passive heatsink dissipating operational heat
- Typical operating temperatures between 40-50°C under full load
- Effective heat dissipation from both USB hub and Ethernet controller chipsets
- No performance throttling during sustained high-bandwidth transfers
- Chipset-level thermal protection if excessive temperatures occur
Electromagnetic Shielding
- Aluminum construction provides EMI (Electromagnetic Interference) shielding
- Protects signal integrity for both USB and Ethernet connections
- Reduces susceptibility to external electromagnetic interference
- Meets EMI/EMC (Electromagnetic Compatibility) compliance standards
Plug-and-Play Operation
- No driver installation required on Windows 10/11 and macOS systems
- Native RTL8153 drivers included in modern operating systems
- USB hub functionality operates with inbox drivers across all platforms
- Automatic driver installation on Windows 10/11 upon connection
- Linux support through r8152 driver module in kernel 3.16 and newer
Operating System Compatibility
- Windows 7, 8, 8.1, 10, and 11 (32-bit and 64-bit editions)
- macOS X 10.6 Snow Leopard and all later versions
- Linux distributions with kernel 3.16 or newer (Ubuntu 14.04 LTS+)
- Chrome OS supported on USB-C enabled Chromebooks
- Windows 7/8 may require Realtek driver download for Ethernet functionality
Device Compatibility
- MacBook Pro (2016 and later), MacBook Air (2018 and later)
- Dell XPS series, HP Spectre/EliteBook, Lenovo ThinkPad with USB-C ports
- Microsoft Surface devices featuring USB Type-C connectivity
- iPad Pro models with USB-C ports
- Samsung Galaxy Tab series and other USB-C tablets
- Compatible with Thunderbolt 3 and Thunderbolt 4 ports
Power Management Features
- USB bus-powered operation requiring no external power adapter
- Total power consumption approximately 5-6 watts maximum
- USB hub baseline power draw approximately 1 watt
- Gigabit Ethernet adapter consumes 2-3 watts during active transfers
- Energy Efficient Ethernet reduces power during low network activity periods
UASP Protocol Support
- USB Attached SCSI Protocol (UASP) support for enhanced storage device performance
- Reduces CPU utilization and latency for USB-connected external drives
- Improved throughput for UASP-capable SSDs and hard drives
- Faster command processing compared to traditional USB mass storage protocol
Network Cable Compatibility
- Accepts standard RJ45 Ethernet cables (Cat5e, Cat6, Cat6a)
- Cat5e cables support Gigabit speeds up to 100 meters
- Cat6/Cat6a cables provide optimal performance and future-proofing
- Auto MDI/MDIX eliminates need for crossover cables in any configuration
- Shielded twisted pair (STP) cables recommended in electromagnetically noisy environments
Flow Control and Congestion Management
- IEEE 802.3x flow control for network congestion management
- Prevents packet loss during high-traffic network scenarios
- Optimizes throughput in corporate networks with multiple simultaneous users
- Improves reliability for time-sensitive applications like video conferencing
Hot-Plug Support
- Connect and disconnect USB devices during operation without system restart
- Automatic device recognition within 2-3 seconds of connection
- Hot-plug detection for USB peripherals through integrated controller
- No disruption to Ethernet connectivity when adding/removing USB devices
Supported USB Peripheral Categories
- Storage devices: USB flash drives, external HDDs/SSDs, card readers, SSD enclosures
- Input devices: keyboards, mice, trackpads, drawing tablets, game controllers
- Audio equipment: USB microphones, DACs, audio interfaces (within power limits)
- Imaging devices: webcams, document cameras, scanners
- Other peripherals: printers, wireless adapters, security keys, presentation remotes
Professional Networking Features
- Suitable for corporate networks requiring physical wired authentication
- VLAN support enables network segmentation in enterprise environments
- Hardware checksum offloading improves performance during large file transfers
- Compatible with network management and monitoring tools
- Reduced latency (1-3ms improvement) compared to wireless connections
Data Transfer and Protocol Support
- Bulk transfer mode for high-speed storage operations
- Isochronous transfer for audio/video streaming devices
- Interrupt transfer for input devices requiring low latency
- Control transfer for device configuration and management
- All file systems supported by host operating system
Safety Features
- Individual USB port over-current protection with automatic shutdown
- Short-circuit protection preventing damage to connected devices and host
- ESD (Electrostatic Discharge) protection on all USB and Ethernet ports
- Built-in USB and Ethernet signal integrity management
- Error detection and correction mechanisms in both subsystems
Bandwidth Management
- USB-C upstream connection operating at USB 3.0 speeds (5 Gbps minimum)
- Intelligent bandwidth allocation between USB hub and Ethernet adapter
- Combined theoretical maximum: 6 Gbps (5 Gbps USB + 1 Gbps Ethernet)
- Controller prioritizes and manages traffic between subsystems
- Practical bandwidth allocation prevents bottlenecks in typical usage scenarios
Environmental Specifications
- Operating temperature range: 0°C to 45°C
- Storage temperature range: -10°C to 60°C
- Humidity tolerance: 10% to 90% non-condensing
- Suitable for office, home, and mobile work environments
- Durable aluminum construction withstands daily transport and handling
Ugreen UG- 60600 USB-C to 3×USB3.0 Hub+RJ45 (1000M) Ethernet Adapter
Original price was: KSh3,000.KSh2,500Current price is: KSh2,500. Ex VATOriginal price was: KSh3,000.KSh2,500Current price is: KSh2,500. Ex VAT Add to cart Quick View Buy via WhatsApp
