Ugreen UG- 20162 Cat 6 U/UTP Lan Cable 5m (Black)

The Ugreen UG-20162 delivers Category 6 unshielded twisted pair (U/UTP) performance across a 5-meter cable length. This extended reach configuration supports gigabit network applications for cross-room installations, multi-level connections, and distributed equipment deployments.

Full Gigabit Bandwidth Over Extended Length

The UG-20162 supports bandwidth up to 250 MHz across its entire 5-meter span. This frequency specification enables complete 1000 Mbps data transmission without throttling or speed reduction. Consequently, users achieve sustained gigabit performance for high-throughput applications including network backup operations, media streaming servers, and distributed database systems.

The cable adheres to TIA/EIA-568-B Category 6 standards throughout the extended length. Four twisted copper pairs maintain precise differential impedance at 100 ohms across the cable run. Additionally, the controlled twist geometry minimizes signal attenuation and crosstalk interference that can degrade performance in longer cable segments.

Advanced Cable Construction

Ugreen engineers the UG-20162 with premium PVC jacketing in black finish. The outer diameter measures approximately 6.0mm, balancing physical durability with routing flexibility through standard cable pathways. Moreover, the jacket composition resists abrasion during installation through wall plates, ceiling spaces, and under-floor cable channels.

The internal conductor assembly features 24 AWG stranded copper wire construction. This gauge specification provides the electrical conductivity required for maintaining Category 6 performance over 5 meters while offering superior flexibility compared to solid conductor designs. Furthermore, the stranded configuration reduces stress concentration during bending, extending cable service life in dynamic installation environments.

Professional-Grade Connector Systems

Both terminations incorporate precision-engineered RJ45 8P8C modular plugs with reinforced strain relief boots. The contact pins feature 50-micron gold plating that maintains consistent electrical contact resistance below 20 milliohms. Each connector follows T568B pin-out standards for universal network infrastructure compatibility.

The injection-molded plug housings provide mechanical protection for the eight-conductor termination. Internal strain relief design transfers cable tension to the housing rather than individual wire-to-pin junctions. Therefore, the Ugreen UG-20162 withstands repeated flexing and positional adjustments without connection failures or intermittent link drops.

Five-Meter Installation Applications

The 5-meter cable length addresses specific long-distance network scenarios. Router to desktop connections across large home offices, floor-to-floor vertical cable runs in split-level residences, and equipment rack to remote patch panel links represent optimal applications. Additionally, the length enables routing through architectural features including doorways, around corners, and through cable management raceways without tension or excessive coiling.

The UG-20162 eliminates the need for cable joining or extension adapters in mid-range installations. The continuous 5-meter construction maintains electrical performance consistency without introducing additional connection points that increase insertion loss or reflection interference.

Electrical Performance Over Distance

Operating specifications maintain -20°C to +60°C ambient temperature tolerance. The Ugreen UG-20162 preserves Category 6 electrical characteristics throughout this thermal range without parameter drift. Additionally, the cable supports Power over Ethernet (PoE) applications compliant with IEEE 802.3af standards, delivering up to 15.4 watts across the 5-meter distance to powered devices.

Insertion loss measurements remain below 22.8 dB at 100 MHz for the full cable length. Return loss specifications exceed 20.1 dB at the same test frequency. These electrical characteristics ensure the UG-20162 maintains bit-error-rate performance below 10^-12 for error-free data transmission in enterprise and residential network segments.

Universal Network Compatibility

The UG-20162 operates with all IEEE 802.3ab compliant gigabit Ethernet equipment. Modern network interface controllers automatically negotiate 1000BASE-T operation at full-duplex mode. Moreover, the cable maintains complete backward compatibility with Fast Ethernet (100BASE-TX) and legacy 10BASE-T installations without configuration changes.

Contemporary networking equipment featuring auto-MDI/MDI-X capability eliminates straight-through versus crossover cable concerns. The Ugreen UG-20162 connects switches to routers, computers to network wall outlets, and access points to Power over Ethernet injectors without adapter requirements or manual port configuration.

Cable Specifications

• Category Rating: Cat 6 U/UTP (Unshielded Twisted Pair)
• Bandwidth: 250 MHz
• Maximum Data Rate: 1000 Mbps (1 Gigabit)
• Cable Length: 5 meters (16.4 feet)
• Conductor Gauge: 24 AWG stranded copper
• Number of Pairs: 4 twisted pairs
• Outer Diameter: 6.0mm (approximate)
• Characteristic Impedance: 100 ohms ±15%

Connector Specifications

• Connector Type: RJ45 8P8C modular plug (both ends)
• Contact Plating: 50-micron gold plating
• Wiring Standard: T568B
• Strain Relief: Reinforced molded boot design
• Plug Housing Material: High-impact polycarbonate
• Insertion Cycles: Rated for 1000+ mating cycles
• Contact Resistance: ≤ 20 milliohms

Performance Specifications

• Compliance Standards: TIA/EIA-568-B, ISO/IEC 11801
• Operating Temperature: -20°C to +60°C
• Storage Temperature: -40°C to +70°C
• PoE Support: IEEE 802.3af (up to 15.4W)
• Insertion Loss: ≤ 22.8 dB at 100 MHz
• Return Loss: ≥ 20.1 dB at 100 MHz
• NEXT (Near-End Crosstalk): ≥ 39.9 dB at 100 MHz
• DC Resistance: ≤ 9.5 ohms per 100m
• Bit Error Rate: < 10^-12

Physical Specifications

• Jacket Material: PVC (Polyvinyl Chloride)
• Jacket Color: Black
• Cable Type: Round patch cord
• Flexibility: Stranded conductor design
• Minimum Bend Radius: 25mm (4x cable diameter)
• Cable Weight: Approximately 75g

Compatibility Specifications

• Network Standards: IEEE 802.3ab (1000BASE-T), 802.3u (100BASE-TX), 802.3i (10BASE-T), 802.3bz (2.5GBASE-T/5GBASE-T capable)
• Device Compatibility: Desktop computers, laptops, network switches, managed switches, routers, gaming consoles, smart TVs, NAS devices, IP cameras, VoIP phones, wireless access points, media servers, PoE injectors
• Operating System Support: Windows 7/8/10/11, macOS 10.x and later, Linux distributions, Unix variants, network equipment firmware
• Auto-Negotiation: Supports auto-MDI/MDI-X functionality