Share Print
Vention SATA 15P Male to 90° 2*15P Female Power Splitter Cable 0.15M Black
Share
-20%New

Vention SATA 15P Male to 90° 2*15P Female Power Splitter Cable 0.15M Black

in Other Accessories

KSh800 Save:KSh200(20%) Ex VAT

Available in stock

Key Features & Benefits

  • 90-Degree Male Connector: The right-angle input plug fits flush against the PSU cable, reducing cable bulk and improving routing in small form-factor and mid-tower cases where straight connectors can stress solder joints.
  • Pure Copper 18 AWG Conductors: Thicker-gauge pure copper wire delivers stable current across all three voltage rails (3.3V, 5V, 12V), supporting power-hungry high-capacity HDDs without voltage sag or performance drop.
  • Full Voltage Rail Support: The cable carries 3.3V, 5V, and 12V simultaneously — compatible with SATA I, II, and III drives. Additionally, it supports devices that draw from the 3.3V rail, which some budget splitters omit entirely.
  • Double Head Clasp Design: Each female connector features a locking clasp mechanism for a secure, rattle-free connection. Consequently, drives stay firmly seated during vibration from high-RPM HDDs or active cooling systems.
  • Broad Device Compatibility: Powers 2.5" and 3.5" HDDs, SSDs, optical drives (DVD/Blu-ray burners), and PCIe expansion cards — making it a flexible single-cable solution for expanding a storage or peripheral setup.
Category:
Description

Vention SATA 15P Male to 90° 2×15P Female Power Splitter Cable 0.15M Black (KDBBB)

The Vention SATA Power Splitter Cable (KDBBB) converts a single SATA power port on your PSU into two independent SATA power connections. It is built for PC builders, system integrators, and upgraders who need to add a second storage drive without replacing their power supply. The 90-degree male connector and compact 0.15M length make it particularly useful in tight chassis where a straight-entry plug would cause cable strain or clearance issues.

Technical Specifications

General

Spec Detail
Brand Vention
Model KDBBB
Colour Black
Cable Length 0.15M (approx. 15cm)

Connectors

Spec Detail
Input Connector SATA 15-Pin Male (90° / Right-Angle)
Output Connectors 2× SATA 15-Pin Female (straight)
Configuration Y-Splitter (1-to-2)

Electrical

Spec Detail
Wire Gauge 18 AWG
Conductor Material Pure Copper
Supported Voltage Rails 3.3V, 5V, 12V
Drive Standard Compatibility SATA I, II, III

Physical

Spec Detail
Package Dimensions 20.6 × 14.6 × 0.2 cm
Cable Weight 40g

Use Cases & Applications

The Vention KDBBB SATA Power Splitter Cable addresses a common bottleneck in desktop PC builds and upgrades — running out of SATA power connectors on an existing PSU.

Adding a Second Storage Drive — When a budget or older power supply ships with only one or two SATA power leads, this splitter extends capacity immediately. It works with 2.5″ SSDs, 3.5″ mechanical drives, and NVMe-to-SATA adapters alike.

Compact or SFF Builds — The 90-degree male connector sits flat against the PSU cable run, reducing the bend radius at the plug. This makes cable routing noticeably cleaner in small form-factor (SFF) and Micro-ATX cases where clearance between the drive bay and the PSU shroud is limited.

Optical Drive Additions — Users adding a DVD burner or Blu-ray drive alongside an existing HDD or SSD can use this splitter rather than sourcing a new PSU with additional leads. Furthermore, the double-clasp female connectors hold optical drive plugs securely despite the lighter clamping force those connectors typically exert.

Budget PC Upgrades — Replacing a power supply purely for more SATA ports adds cost and downtime. The KDBBB splitter eliminates that need by branching an existing connector, provided the PSU’s total rated wattage comfortably covers the combined load of both connected devices.

Similar Products