Ugreen UG- 45110 HiTune P3 True Wireless Earbuds White
The Ugreen UG-45110 HiTune P3 delivers wireless audio performance through Bluetooth 5.4 technology. This model features 12mm bio-diaphragm dynamic drivers designed for balanced sound reproduction across the frequency spectrum. The earbuds integrate AI-powered Environmental Noise Cancellation (ENC) with dual microphones per earbud for enhanced call clarity.
Bluetooth Connectivity Architecture
The UG-45110 operates on Bluetooth 5.4 with support for multiple protocols including HFP, AVRCP, A2DP, BLE, and SPP. This configuration provides a maximum transmission range of 10 meters. The wireless connection delivers ultra-low latency at 0.06 seconds, making the HiTune P3 suitable for video synchronization and gaming applications. The earbuds support AAC and SBC audio codecs for compatibility across devices.
Furthermore, the Ugreen UG-45110 enables dual-device connectivity through the UGREEN mobile application. Users can maintain simultaneous connections to two devices and switch between them without manual re-pairing. The Bluetooth frequency operates between 2400MHz and 2483.5MHz with a maximum RF output power of 4dBm.
Audio Performance and Driver Technology
The 12mm bio-diaphragm dynamic speakers in the Ugreen UG-45110 cover a frequency response range of 20Hz to 20kHz. The driver architecture provides separation between bass frequencies and treble reproduction. The acoustic design has been validated by UGREEN’s internal acoustic engineering team for sound quality consistency.
Additionally, the HiTune P3 incorporates two microphones per earbud for call management. The AI algorithm noise reduction technology actively filters ambient noise from environments such as public transportation, outdoor spaces, and commercial areas. This dual-microphone configuration ensures vocal clarity during phone conversations.
Power Management and Battery Specifications
The Ugreen UG-45110 contains 34mAh batteries in each earbud rated at 3.85V (0.131Wh). The charging case holds a 440mAh battery at 3.7V (1.63Wh). This power configuration delivers 5.5 hours of continuous music playback on a single earbud charge. With the charging case, total playtime extends to 28 hours (equivalent to approximately 420 songs or 14 movies).
Moreover, the HiTune P3 supports fast charging via USB-C connection. A 10-minute charge provides approximately 100 minutes of playback time. Full charging requires 1.5 hours for the earbuds and 2 hours for the case. The case accepts input power at 5V/500mA and outputs at 5V/200mA.
Physical Design and Water Resistance
Each earbud in the Ugreen UG-45110 weighs 3.6 grams for extended wearing comfort. The earbuds carry an IPX5 waterproof rating, protecting against sweat and water splashes during fitness activities. The package includes three sizes of silicone ear tips (S, M, L) with medium size pre-installed. The white finish provides visual contrast across different environments.
The HiTune P3 features smart touch controls on each earbud surface. These controls manage playback, volume adjustment, call handling, and voice assistant activation. The one-step pairing function automatically initiates connection mode when opening the charging case.
Technical Specifications
Connectivity Standards
- Bluetooth Version: 5.4
- Supported Protocols: HFP, AVRCP, A2DP, BLE, SPP
- Audio Codecs: AAC, SBC
- Bluetooth Frequency Range: 2400MHz – 2483.5MHz
- Maximum Transmission Distance: 10 meters
- Maximum RF Output Power: 4dBm
- Latency: 0.06 seconds
Audio Components
- Driver Size: 12mm bio-diaphragm dynamic speaker
- Frequency Response: 20Hz – 20kHz
- Microphone Configuration: 2 microphones per earbud
- Noise Cancellation: ENC (Environmental Noise Cancellation) with AI algorithm
- Call Enhancement: Dual-microphone system with AI vocal enhancement
Battery and Power
- Earbud Battery Capacity: 34mAh per earbud at 3.85V (0.131Wh)
- Charging Case Battery: 440mAh at 3.7V (1.63Wh)
- Single Charge Playtime: 5.5 hours
- Total Playtime with Case: 28 hours
- Earbud Charging Time: 1.5 hours
- Case Charging Time: 2 hours
- Fast Charge Performance: 10 minutes charging = 100 minutes playtime
- Charging Port: USB-C
- Case Input Power: 5V/500mA
- Case Output Power: 5V/200mA
Physical Specifications
- Earbud Weight: 3.6 grams per earbud
- Color: White
- Water Resistance Rating: IPX5
- Ear Tip Sizes: S, M, L (M pre-installed)
Control and Features
- Touch Controls: Smart touch interface on each earbud
- Dual-Device Connection: Simultaneous connection to 2 devices (via UGREEN app)
- Pairing Method: One-step automatic pairing
- Voice Assistant: Compatible with device voice assistants
Package Contents
- Ugreen UG-45110 HiTune P3 Earbuds (1 pair)
- Charging Case
- USB-C Charging Cable
- Silicone Ear Tips (S, M, L sizes)
- User Manual
- 24-month warranty
Compatibility
- Operating Systems: iOS, Android, Windows, macOS
- Connection Requirements: Bluetooth-enabled devices
- App Requirements: UGREEN mobile app (for dual-device functionality)











