Falcon 3 metre conduit is used to help guide cables and wiring around the home / site or work place.

Each length is manufactured from robust heavy gauge PVC which offers protection for the cable.

20mm conduit is available in either black or white.

For surface mounting and containment of low voltage cabling

A range of moulded accessories facilitate both the mounting of and accommodation of direction changes & terminations.

May be bent with the use of the applicable size and type of bending spring (Green Tip)

Compliance

Manufactured to the applicable requirements of BS EN 61386-1:2008

Conduit Systems for cable management – General requirements

Material

PVC-u (Poly Vinyl Chloride – un-plasticised).

Operating Temperature

-5°C to +60°C (The product should not be exposed to the upper temperature limit for prolonged periods of time).

Fire Performance:

Non-flame propagating – under an applied flame the flame does not propagate & will extinguish itself once the applied flame is removed. Does not drip flaming particles.

Spread of Fire

To the requirements of BS EN 61386-1:2008

Vertical Burning Test (UL-94)

V-0 @ 1.6mm

Chemical Properties

Excellent resistance to many chemical

solutions including those of weak acids,

strong & weak alkalis, alcohols, aliphatic

hydrocarbons and is soluble or will swell in

ketones.

Water Absorption

Negligible. PVC-u is impervious to damp

conditions and will not corrode.

Electrical Properties

PVC-u is non-conductive and therefore will

not become live due to accidental contact

with live conductors. It has a typical

insulation resistance of more than 100MO

Vicat Softening Point – Raw Material (Please

also note operating temperature data

above)

80°C

Thermal Properties

Co Efficient of Liner Expansion 7 x 10?5/m/°C

Hazard Information

No specific hazards as the ingredients are

bound into the PVC-u matrix and are thus

rendered virtually insoluble. (See also Falcon

Product Safety Data Sheet)

REACH (Registration, Evaluation,

Authorisation & Restriction of Chemicals)

May contain SVHC – see product specific

REACH declaration for full details.

Standard Colour White and Black

Standard Length 3 Metres. Also available in other lengths on

request.

Nominal Dimensions

FHG20 – 20mm Outside Diameter x 1.7mm

wall thickness

FHG25 – 25mm Outside Diameter x 1.9mm

wall thickness

Cross Sectional Area

FHG20 – 216.4 mm²

FHG25 – 353.0 mm²

Usable Cross-Sectional Area (45%) FHG20 – 97.4 mm²

FHG25 – 158.8 mm²