Ugreen UG- 60600 USB-C to 3×USB3.0 Hub+RJ45 (1000M) Ethernet Adapter

The UGREEN UG-60600 combines USB expansion and wired network connectivity into a single multifunction adapter. This device transforms one USB Type-C port into three USB 3.0 Type-A ports plus a Gigabit Ethernet connection, addressing both peripheral connectivity and network requirements for modern USB-C laptops.

Dual Functionality Architecture

The UG-60600 integrates two independent subsystems within a unified housing. The USB hub component manages peripheral connections, while the Ethernet adapter provides network functionality. Both subsystems operate simultaneously without resource conflicts, allowing users to transfer data through USB ports while maintaining network connectivity.

This convergence design reduces the number of separate adapters required in mobile work scenarios. Consequently, professionals need only one device instead of carrying separate USB hubs and Ethernet adapters.

USB 3.0 Hub Performance

The three USB 3.0 ports deliver theoretical bandwidth up to 5 Gbps, matching USB 3.1 Gen 1 specifications. Each port supports practical transfer speeds approaching 500 MB/s when used individually. The shared 5 Gbps bandwidth distributes among active USB connections, meaning simultaneous transfers across multiple ports divide available throughput accordingly.

Furthermore, the USB ports provide up to 900mA power output each, adhering to USB 3.0 power delivery standards. This capacity accommodates most bus-powered peripherals including external hard drives, flash drives, keyboards, mice, and webcams without requiring supplemental power sources.

Gigabit Ethernet Specifications

The RJ45 port implements Gigabit Ethernet (1000BASE-T) connectivity, providing theoretical maximum throughput of 1000 Mbps (125 MB/s). This represents a substantial improvement over Fast Ethernet’s 100 Mbps limitation. The Ethernet adapter supports auto-negotiation, automatically adjusting to network infrastructure capabilities:

• 1000 Mbps when connected to Gigabit switches or routers
• 100 Mbps when connected to Fast Ethernet equipment
• 10 Mbps for legacy network devices

Moreover, the Ethernet port supports full-duplex communication, enabling simultaneous transmission and reception at maximum speeds. This bidirectional capability proves essential for applications requiring concurrent upload and download operations.

Ethernet Chipset Technology

The UGREEN UG-60600 incorporates a Realtek RTL8153 Gigabit Ethernet controller. This proven chipset provides several technical advantages:

• IEEE 802.3, 802.3u, and 802.3ab standards compliance
• Advanced power management reducing energy consumption during idle periods
• Hardware-level checksum offloading reducing CPU utilization
• Wake-on-LAN (WoL) support for remote system activation
• Jumbo frame support up to 9KB for improved network efficiency

The RTL8153 chipset includes integrated PHY (Physical Layer) circuitry, eliminating the need for external transceiver components. This integration reduces signal latency and improves overall reliability.

USB Hub Controller

The USB hub section utilizes an integrated controller managing traffic distribution across the three downstream USB 3.0 ports. The controller provides:

• Hot-plug detection allowing device connection during operation
• Individual port power management
• Over-current protection preventing damage from faulty peripherals
• Backward compatibility with USB 2.0 and USB 1.1 devices
• UASP (USB Attached SCSI Protocol) support for enhanced storage performance

Network Performance Characteristics

Real-world Gigabit Ethernet performance typically achieves 900-940 Mbps throughput due to protocol overhead and network conditions. The UG-60600’s RTL8153 chipset efficiently handles packet processing, minimizing latency and maximizing sustained transfer rates.

Additionally, the adapter supports various network protocols and features:

• IPv4 and IPv6 protocol stacks
• VLAN tagging (IEEE 802.1Q)
• Energy Efficient Ethernet (IEEE 802.3az)
• Crossover detection and auto-correction (Auto MDI/MDIX)

Physical Construction and Design

The UG-60600 features a rectangular aluminum alloy housing measuring approximately 110mm × 45mm × 17mm. The aluminum construction provides multiple functional benefits:

• Effective heat dissipation from both USB and Ethernet controllers
• Electromagnetic interference (EMI) shielding protecting signal integrity
• Structural durability withstanding travel and daily handling
• Professional aesthetic complementing modern laptop designs

The device includes an integrated USB Type-C cable approximately 15cm in length. This attached cable design prevents loss while providing sufficient reach for convenient desktop positioning. The cable incorporates strain relief at the USB-C connector junction to prevent wire damage from repeated bending.

Port Layout and Accessibility

The three USB 3.0 ports align along one edge of the housing, providing 12mm spacing between adjacent ports. This spacing accommodates most USB connectors, though oversized plugs on some devices may limit simultaneous use of all three ports.

The RJ45 Ethernet port occupies the opposite end of the housing. This positioning separates network and peripheral connections, improving cable management in cluttered desk environments. The Ethernet port includes integrated LED indicators visible through the RJ45 connector housing.

LED Status Indicators

The UG-60600 incorporates multiple LED indicators providing operational feedback:

USB Hub LED

• Blue illumination indicates hub power and activity
• Continuous light confirms proper USB-C connection
• Located on top surface for easy visibility

Ethernet Link/Activity LEDs

• Green LED indicates Gigabit (1000 Mbps) connection speed
• Amber LED indicates 100 Mbps connection speed
• Flickering indicates network data transmission/reception
• Integrated within RJ45 port housing

Plug-and-Play Operation

The UG-60600 operates without driver installation on modern operating systems. Windows 10/11 and macOS systems include native drivers for the RTL8153 Ethernet chipset. Similarly, the USB hub functionality requires no additional software.

However, Windows 7 and 8 users may need to download Realtek Ethernet drivers for optimal network adapter functionality. Linux distributions with kernel 3.16 or newer include RTL8153 support through inbox drivers.

Interface Specifications

• Upstream Connection: USB Type-C male connector
• USB Downstream Ports: 3× USB 3.0 Type-A female ports
• Ethernet Port: RJ45 female connector (10/100/1000 Mbps)
• USB Data Rate: Up to 5 Gbps (USB 3.1 Gen 1) shared across three ports
• Ethernet Speed: 10/100/1000 Mbps auto-negotiation
• Cable Length: Approximately 15 centimeters (integrated)

USB Hub Performance

• USB Standard: USB 3.0 / USB 3.1 Gen 1 compliant
• Transfer Speed: Up to 5 Gbps theoretical maximum
• Real-World Performance: Up to 500 MB/s per port when used individually
• Per-Port Power Output: Up to 900mA at 5V (USB 3.0 specification)
• Total USB Power: Up to 2.7 watts across three ports
• Backward Compatibility: USB 2.0 (480 Mbps) and USB 1.1 (12 Mbps)
• UASP Support: USB Attached SCSI Protocol for enhanced storage performance

Ethernet Adapter Specifications

• Chipset: Realtek RTL8153 Gigabit Ethernet controller
• Maximum Speed: 1000 Mbps (125 MB/s) full-duplex
• Supported Speeds: 10/100/1000 Mbps auto-negotiation
• Standards Compliance: IEEE 802.3 (10BASE-T), 802.3u (100BASE-TX), 802.3ab (1000BASE-T)
• Duplex Mode: Full-duplex and half-duplex support
• Flow Control: IEEE 802.3x flow control for congestion management
• Wake-on-LAN: Supported (OS and BIOS dependent)

Network Features

• Auto MDI/MDIX: Automatic crossover detection and correction
• Jumbo Frame: Supports frames up to 9KB
• VLAN Support: IEEE 802.1Q VLAN tagging
• IPv6 Support: Full IPv6 protocol stack compatibility
• Energy Efficient Ethernet: IEEE 802.3az EEE support
• Checksum Offload: Hardware TCP/UDP/IP checksum offloading
• Cable Compatibility: Cat5e, Cat6, Cat6a Ethernet cables