intruder alarm system proftech
intruder alarm system are systems designed to detect unauthorized entry into building or area. They consist of an array of sensors, a control panel, back-up battery and alerting system, and interconnections.
Nowadays, householders want much more than a traditional monitored security system. They prefer a system that can react any kind of risk such as intrusion, fire or some other accidents. We provide you high class professional solution with multiple options.
Sensors detects intruders by many methods such as monitoring door and window contacts, by passive infrared motion detectors, ultrasound, vibration, electric or magnetic fields, or microwaves.
Sensors may be directly wired to a control panel that provides sensors power, or may communicate wireless.
intruder alarm system for commercial or government organization we have more experience in installing and servicing all types of security alarm system. All products, prior to being supported by the company, are thoroughly tested by our technicians with regard to their features and in particular to reliability.
Burglar (or intrusion), alarms range from simple and easy to use general security system, to some of the most complex system in Kenya. The addition of back-to-base central monitoring for offices and factories means your premises is always being watched. Proftech also installs major systems utilizing various technologies such as video motion detection, perimeters protection and closed circuit television equipment.
Intruder Alarm System Advantages;
The great thing with automatic alarms is that they allow one to keep their home safe even while away. One is also able to remotely control the system, monitor activate and receive real-time footage of perpetrators on mobile phone, tablet or PC as soon as the alarm is activated. An optional GSM module, which would then automatically send a message to the home owner in case the alarm is triggered, can also be installed with the system. With our intruder alarm systems and alarm response, protecting your loved ones has never been easier.
intruder alarm system for intrusion prevention is massively present in our own homes and Companies.Our burglar alarms may be armed in the “Away” or “Stay” mode. Once the burglar alarms are activated, each monitored zone has the ability to recognize a violation. Once a zone has been violated, the intruder alarm system then dials an ADT monitoring center and transmits the message through a telephone line. Once the signal is received, the intruder alarm system will wait to send another message if another zone is tripped. Entering the code on the burglar alarms keypad and turning off the system will end this process with the ADT monitoring center
A basic intruder alarm system consists of a control panel, with rechargeable battery power backup and internal or external keypads, several interior and perimeter intrusion detectors, and one external sounder, at least.
An intruder alarm system can be classified as an hardwired, wireless, or an hybrid system. Wireless systems are used when there is not pre-wiring, operating at 433/868 MHz.
Most secure intruder alarm systems are hardwired systems, because wireless systems will use additional battery power and, even with Anti-jamming protection, still can be affected by radio-frequency interference. Hybrid alarm systems allow simultaneously the installation of wireless and hardwired detectors, being the most versatile.
Most recent intruder alarm systems allow now programmed supervision for both single, double, or triple End-of-line-resistor loop circuit configurations.
Remote monitoring/control can be made using the telephone line or with a GSM/GPRS/IP module. Both allow a connection with any person, or to a dedicated monitoring station.
GSM/GPRS modules have entry channels usually enabled to the negative transition (from 12V to 0V), thus being able to be directly connected to the STROBE and BELL control panel signals. These modules can be programmed from a mobile phone or from an USB port, pre-defining the destination phone numbers with SMS/MMS or simple alarm voice messages. Existing control panel telephone lines can also be directly wired to a GSM/GPRS/IP module communicator, and be used to send intruder alarm messages.
To adapt an older alarm system to send GSM/GPRS or IP alerts, the BELL output may be wired to an input terminal of a GSM/GPRS/IP module. This simple arrangement will avoid the need for extra month fees in contracts with security companies. GSM/GPRS/IP modules can also be used to arm, disarm and even to verify all detectors, or a ready-to-arm condition. Also, a bidirectional module can be used when an intruder alarm control panel has already built-in an arming/disarming loop (programmed as maintained key switch arm).
intruder alarm system Monitoring and Control;
REMOTE CONTROL You can control this burglar alarm system Arm/Disarm/Voice Monitoring /Intercom by cell phone anywhere
*SCARE BURGLAR AWAY When someone trigger this system that will be alarm to scare thief away and also will make a phone or sending a message to someone which you save the phone
*BUILT-IN BATTERY This system work well when someone cut wires or power off. You don’t worry other people intrude your house when power off
*CELLPHONE FUNCTION This main unit can make the phones like a cell phone so this also is a spare mobile phone
*EMERGENCY HELP You can press an alarm button on the remote control when some emergency thing happen, this system will go off right now and will make a phone
IP modules allow the communication between an intruder alarm system and a remote monitoring station. Some connect directly to the existing control panel main telephone lines, transmitting in ContactID or SIA protocols to an IP receiver station.
A very low cost IP module can be made by using an embedded standard micro web-server, with built-in IP connectivity that is able to send and receive digital commands via TCP/IP. This could be a nice low cost solution for the existing alarm and notification home automation models, and without the need to have a main server PC running, or special software (like other expensive available solutions). Although care should be taken to assure a full SSL (Secure Sockets Layer) communication.
By using the latest wireless technology, our alarm security systems coupled with our help is never far away, especially in your hour of need. Our systems also enable each owner to keep an eye on their business and home from wherever they are.
An added advantage is that our technology also supports control systems such as air conditioners, lights, electric window blinds, garage doors and more. We also have the provision to set your system up on the cloud, which allows for remote alarm and electronics management.
Whether you want just the basic manual alarm or all the bells and whistles that come with an automatic system, our experts can help you customize a security alarm system that suits your office.
Home Safes
We offer home safes to protect your valuables. The safes come in various sizes and with various configurations such as dual key locks, digital PIN, fingerprint, among others.
Alarm Systems
Our alarm systems consist of door sensors, PIR detectors, keypad control, etc. The microprocessor technology allows the system to transmit timely signals on detecting intrusions. The system can also be accessed from a mobile phone through the app.
WE deal with IDS panels,secolink panels,Risco panel,lightsys panel, Pir motion sensors, magnetic contacts
