Ugreen UG- 20164 Cat 6 U/UTP Lan Cable 10m (Black)

The Ugreen UG-20164 provides Category 6 unshielded twisted pair (U/UTP) Ethernet connectivity across a 10-meter cable span. This maximum consumer-grade length configuration supports gigabit network applications for extensive installations including multi-room deployments, outdoor-to-indoor transitions, and distributed infrastructure connections.

Sustained Gigabit Performance Across 10 Meters

The UG-20164 supports bandwidth up to 250 MHz throughout its complete 10-meter length. This frequency specification enables full 1000 Mbps data transmission without speed degradation or packet loss. Consequently, users maintain consistent gigabit performance for demanding applications including network-attached storage access, centralized backup systems, and high-definition security camera feeds.

The cable construction adheres to TIA/EIA-568-B Category 6 specifications across the entire cable run. Four twisted copper pairs maintain precise 100-ohm differential impedance throughout the extended distance. Additionally, the engineered twist ratios minimize both near-end crosstalk (NEXT) and far-end crosstalk (FEXT) that can compromise signal integrity in longer cable segments.

Enhanced Physical Construction

Ugreen manufactures the UG-20164 with reinforced PVC jacketing in black finish. The outer diameter measures approximately 6.0mm, providing robust mechanical protection while maintaining sufficient flexibility for installation through conduits, wall cavities, and cable management systems. Moreover, the jacket formulation resists environmental factors including UV exposure for window-adjacent routing and temperature variations in unconditioned spaces.

The internal conductor assembly features 24 AWG stranded copper wire construction. This gauge specification delivers the electrical conductivity necessary for maintaining Category 6 performance over 10 meters while offering installation flexibility. Furthermore, the stranded design reduces conductor work hardening during repeated bending, maintaining cable integrity through installation and service life.

Industrial-Grade Connector Engineering

Both cable terminations incorporate heavy-duty RJ45 8P8C modular plugs with extended strain relief boots. The contact pins feature 50-micron gold plating that prevents oxidation and maintains contact resistance below 20 milliohms over thousands of insertion cycles. Each connector follows T568B wiring standards for universal compatibility with global network infrastructure.

The reinforced plug housings provide superior mechanical protection compared to standard patch cord connectors. The extended strain relief design distributes cable tension across a larger area, preventing stress concentration at the conductor-to-pin junction. Therefore, the Ugreen UG-20164 withstands installation through tight spaces and maintains reliable connectivity in high-vibration environments.

Ten-Meter Installation Scenarios

The 10-meter cable length addresses extensive network deployment requirements. Inter-floor vertical cable runs, garage-to-house connections, outdoor security camera installations, and basement server room to main floor office links represent optimal applications. Additionally, the length enables routing through complex architectural features including attic spaces, crawl spaces, and exterior wall penetrations without cable splicing or extension couplers.

The UG-20164 eliminates intermediate connection points that introduce insertion loss and potential failure modes. The continuous 10-meter construction maintains electrical performance consistency from end to end, ensuring reliable gigabit operation across the maximum recommended patch cord distance.

Electrical Performance at Maximum Length

Operating specifications maintain -20°C to +60°C ambient temperature tolerance across the 10-meter span. The Ugreen UG-20164 preserves Category 6 electrical characteristics throughout this thermal range without parameter degradation. Additionally, the cable supports Power over Ethernet (PoE) applications compliant with IEEE 802.3af standards, delivering up to 15.4 watts across the full 10-meter distance with acceptable voltage drop.

Insertion loss measurements remain below 24.4 dB at 100 MHz for the complete cable length. Return loss specifications exceed 20.1 dB at the same test frequency. These electrical characteristics ensure the UG-20164 maintains bit-error-rate performance below 10^-12, meeting requirements for latency-sensitive applications including industrial control systems and real-time monitoring equipment.

Comprehensive Network Infrastructure Support

The UG-20164 operates with all IEEE 802.3ab compliant gigabit Ethernet equipment without configuration adjustments. Modern network interface controllers automatically negotiate 1000BASE-T full-duplex operation. Moreover, the cable maintains complete backward compatibility with Fast Ethernet (100BASE-TX) and legacy 10BASE-T installations, providing migration flexibility during network upgrades.

Contemporary networking devices featuring auto-MDI/MDI-X functionality eliminate cable type concerns for all connection scenarios. The Ugreen UG-20164 successfully connects switches to remote access points, routers to distributed patch panels, and point-to-point links between buildings without crossover adapters or manual port configuration.

Cable Specifications

• Category Rating: Cat 6 U/UTP (Unshielded Twisted Pair)
• Bandwidth: 250 MHz
• Maximum Data Rate: 1000 Mbps (1 Gigabit)
• Cable Length: 10 meters (32.8 feet)
• Conductor Gauge: 24 AWG stranded copper
• Number of Pairs: 4 twisted pairs
• Outer Diameter: 6.0mm (approximate)
• Characteristic Impedance: 100 ohms ±15%

Connector Specifications

• Connector Type: RJ45 8P8C modular plug (both ends)
• Contact Plating: 50-micron gold plating
• Wiring Standard: T568B
• Strain Relief: Extended reinforced molded boot design
• Plug Housing Material: High-impact polycarbonate
• Insertion Cycles: Rated for 1000+ mating cycles
• Contact Resistance: ≤ 20 milliohms

Performance Specifications

• Compliance Standards: TIA/EIA-568-B, ISO/IEC 11801
• Operating Temperature: -20°C to +60°C
• Storage Temperature: -40°C to +70°C
• PoE Support: IEEE 802.3af (up to 15.4W)
• Insertion Loss: ≤ 24.4 dB at 100 MHz
• Return Loss: ≥ 20.1 dB at 100 MHz
• NEXT (Near-End Crosstalk): ≥ 39.9 dB at 100 MHz
• DC Resistance: ≤ 9.5 ohms per 100m
• Bit Error Rate: < 10^-12
• Propagation Delay: ≤ 555 ns per 100m

Physical Specifications

• Jacket Material: PVC (Polyvinyl Chloride)
• Jacket Color: Black
• Cable Type: Round patch cord
• Flexibility: Stranded conductor design
• Minimum Bend Radius: 25mm (4x cable diameter)
• Cable Weight: Approximately 150g
• Pull Tension: Maximum 110N (25 lbf)

Compatibility Specifications

• Network Standards: IEEE 802.3ab (1000BASE-T), 802.3u (100BASE-TX), 802.3i (10BASE-T), 802.3bz (2.5GBASE-T/5GBASE-T capable up to 10m)
• Device Compatibility: Desktop computers, laptops, servers, network switches, managed switches, routers, gaming consoles, smart TVs, NAS devices, IP cameras, VoIP phones, wireless access points, media servers, PoE injectors, industrial controllers
• Operating System Support: Windows 7/8/10/11, Windows Server editions, macOS 10.x and later, Linux distributions, Unix variants, network equipment firmware
• Auto-Negotiation: Supports auto-MDI/MDI-X functionality